Building Materials

Specialists in Model Canal Boats

All Wood Construction Model Boat Kits

ADHESIVES	Price	Purchase
SUPER GLUE 50 gram BOTTLE MEDIUM VISCOSITY	Ł2.99
DEVCON EPOXY RESIN (S209) 5 MINUTE CURE TIME NET WT. 9oz (256g) BONDS METAL, WOOD, CHINA, GLASS, CERAMICS	Ł16.99
PLASTIC WELD 57ml BOTTLE BONDS STYRENE, BUTYRATE, ABS, ACRYLIC, LUCITE & PLEXIGLAS	Ł2.99
EZE-KOTE LAMINATING & FINISHING RESIN (By Deluxe Materials) EASY SANDING, LOW ODOUR, FOAM SAFE, WATER CLEAN UP Eze-kote is a 1-part water based resin alternative to epoxy. Brush on to balsa and light glass cloth to create a tough, ding and fuel resistant film that can be sanded easily and painted after 15-20 minutes. Coverage: 75 ml covers approximately 1 sq metre/coat.	Ł12.99
DELUXE MATERIALS LIGHTWEIGHT FIBREGLASS LAMINATING FABRIC 1.0oz x (1m2) Glass cloth for either laminating or finishing. Suitable for use with both polyester and epoxy finishing systems.	Ł8.99
JAVIS COUNTRYSIDE SCENICS Scatter Material Adhesive 125ml Bottle	Ł2.95
ALIPHATIC RAPID 145ml Bottle Out performs traditional white glues with it's super fast grab time and superior sanding qualities. It will bond most porous materials such as balsa, plywood, spruce, obechi etc. and it is water and shock resistant. Useful for joining aircraft cowling blocks, wing skins, fuselage or hull planking. In fact, it is useful for any joints where the glue line needs to be carved or sanded afterwards. The glue joint will not show - unlike normal sanded PVA glue joints.	Ł4.59
DELUXE MATERIALS ALIPHATIC RESIN 112g Bottle Fast grab, Takes a stain, Superior strength & sanding, Waterproof, Water clean up	Ł4.59
FILLERS	Price	Purchase
DELUXE MATERIALS MODEL LITE FILLER 240ml (White) Strong lightweight, non-shrinking filler for use on Wood, Balsa, Foam, Fibreglass ect	Ł6.75
DELUXE MATERIALS MODEL LITE FILLER 240ml (Balsa) Strong lightweight, non-shrinking filler for use on Wood, Balsa, Foam, Fibreglass ect	Ł6.75
TRIMLINE	Price	Purchase
MODEL TECHNICS Self Adhesive Coach Line (Gold) Each Pack Contains 2.5 metre length of 8 different width tapes on one roll 0.5, 0.8, 1.3, 2.1, 3.3, 5, 7 & 10mm	Ł3.55
MODEL TECHNICS Self Adhesive Coach Line (Silver) Each Pack Contains 2.5 metre length of 8 different width tapes on one roll 0.5, 0.8, 1.3, 2.1, 3.3, 5, 7 & 10mm	Ł3.55
MODEL TECHNICS Self Adhesive Coach Line (Black) Each Pack Contains 2.5 metre length of 8 different width tapes on one roll 0.5, 0.8, 1.3, 2.1, 3.3, 5, 7 & 10mm	Ł3.55
MODEL TECHNICS Self Adhesive Coach Line (Royal Blue) Each Pack Contains 2.5 metre length of 8 different width tapes on one roll 0.5, 0.8, 1.3, 2.1, 3.3, 5, 7 & 10mm	Ł3.55
MODEL TECHNICS Self Adhesive Coach Line (Red) Each Pack Contains 2.5 metre length of 8 different width tapes on one roll 0.5, 0.8, 1.3, 2.1, 3.3, 5, 7 & 10mm	Ł3.55
MODEL TECHNICS Self Adhesive Coach Line (Orange) Each Pack Contains 2.5 metre length of 8 different width tapes on one roll 0.5, 0.8, 1.3, 2.1, 3.3, 5, 7 & 10mm	Ł3.55
MODEL TECHNICS Self Adhesive Coach Line (Yellow) Each Pack Contains 2.5 metre length of 8 different width tapes on one roll 0.5, 0.8, 1.3, 2.1, 3.3, 5, 7 & 10mm	Ł3.55
MODEL TECHNICS Self Adhesive Coach Line (Green) Each Pack Contains 2.5 metre length of 8 different width tapes on one roll 0.5, 0.8, 1.3, 2.1, 3.3, 5, 7 & 10mm	Ł3.55
MODEL TECHNICS Self Adhesive Coach Line (White) Each Pack Contains 2.5 metre length of 8 different width tapes on one roll 0.5, 0.8, 1.3, 2.1, 3.3, 5, 7 & 10mm	Ł3.55
MODEL TECHNICS Self Adhesive Coach Line (Sky Blue) Each Pack Contains 2.5 metre length of 8 different width tapes on one roll 0.5, 0.8, 1.3, 2.1, 3.3, 5, 7 & 10mm	Ł3.55
TOOLS	Price	Purchase
MODELLING T. PINS Length 30mm x 1mm thick with a 10mm flat top SOLD IN PACKS OF 100	Ł3.25
BRASS MODELLING PINS Length 6mm Sold in 15 gram Packs	Ł1.45
BRASS MODELLING PINS Length 10mm Sold in 15 gram Packs	Ł1.55
QUICK CLAMP & SPREADER 4 INCH Super value clamps feature a quick ratchet trigger for final tightening and reversible front jaw which turns the clamp into a spreading tool. This handy clamp also features a push button to release and slide the rear jaw.	Ł3.75
HANDY MODELLING CLAMPS 1 Med & 1 Large Innumerable uses for these rather 'handy clamps'. They are tensioned with rubber bands and fully adjustable. The little end on the shank makes the clamp sit level & upright on the building board and two or three together can be used as jigs etc. The Maximum jaw opening for the large is 4.1/2"112mm (4.1/2"), the medium is 3" (76mm)	Ł1.75
MINI HANDY MODELLING CLAMPS 2 x Small Innumerable uses for these rather "Handy Clamps".They are tensioned with rubber bands and fully adjustable. The little hand on the shank makes the clamp sit level & upright on the building board and two or three together can be used as jigs etc. The maximum jaw opening is 2.1/4" (56mm), it also has the added feature of a lockable jaw allowing it to be set in position.	Ł1.25
HINGE SLITTING JIG This neatly finds the exact centre of the surface to be hinged. You simply place the jig over the part to be hinged and squeeze. The slot in the back of the jig will be the hinge position which you mark with a blade or similar. It keeps all the hinges in a straight line for smooth movement.	Ł1.25
AIRCRAFT COVERING CUTTER When covering with film this tool is invaluable. The moulding holds a standard razor blade and has four cutting slots. When say, a wing panel was being covered, you would hold the cutter against the trailing edge & draw it down the wing. This will cut the film straight & with a 1/16" (1.5mm) overlap to give you a neat sealing edge	Ł1.25
BALSA STRIPPER / CUTTER The unit is supplied with an aluminium 'U' channel, 1 metre (39") long. Comes with full instructions.	Ł12.95
SPARE BLADE FOR BALSA STRIPPER 2 per Pkt	Ł1.45
ALL SQUARE WING RIB BUILDING GAUGES x 2 This ensures those ribs are perfectly upright & square on the building board. Easy to use & slotted for 1/16 x 3/32 x 1/8 (1.5mm, 2mm, 3mm) It also acts as a double thickness gauge	Ł1.45
MODELLERS VICE Jaw Width 40mm Maximum Opening 40mm	Ł3.99
HEAT SHRINK TUBING 10 x 100mm LENGTHS Each Pack Contains 2x Lengths of 1.0mm,1.5mm, 2.5mm, 3.0mm, 5.0mm Thick in various colours Note: Colours may vary from ones shown in picture	Ł1.45
NUTS BOLTS & SCREWS	Price	Purchase
CHEESE HEAD BOLTS M2 Thread Length 12mm Pack of 6	Ł1.25
CHEESE HEAD BOLTS M2 Thread Length 16mm Pack of 6	Ł1.25
CHEESE HEAD BOLTS M3 Thread Length 5mm Pack of 6	Ł1.25
CHEESE HEAD BOLTS M3 Thread Length 10mm Pack of 6	Ł1.25
CHEESE HEAD BOLTS M3 Thread Length 12mm Pack of 6	Ł1.25
CHEESE HEAD BOLTS M3 Thread Length 16mm Pack of 6	Ł1.25
CHEESE HEAD BOLTS M3 Thread Length 20mm Pack of 6	Ł1.25
CHEESE HEAD BOLTS M3 Thread Length 25mm Pack of 6	Ł1.25
CHEESE HEAD BOLTS M3 Thread Length 30mm Pack of 6	Ł1.25
CHEESE HEAD BOLTS M4 Thread Length 25mm Pack of 6	Ł1.25
CHEESE HEAD BOLTS M4 Thread Length 30mm Pack of 6	Ł1.25
NYLOCK NUTS M3 Pack of 10	Ł1.25
NYLOCK NUTS M4 Pack of 10	Ł1.25
SOCKET HEAD BOLTS M2 Thread Length 12mm Pack of 4	Ł1.55
SOCKET HEAD BOLTS M3 Thread Length 20mm Pack of 4	Ł1.35
SOCKET HEAD BOLTS M4 Thread Length 25mm Pack of 4	Ł1.35
SELF TAPPING SCREWS 2 x 1/4 Pack of 20	Ł1.15
SELF TAPPING SCREWS 2 x 3/8 Pack of 20	Ł1.15
SELF TAPPING SCREWS 4 x 3/8 Pack of 10 For use with our Saddle Clamps	Ł0.99
SELF TAPPING SCREWS 4 x 3/4 Pack of 10	Ł0.99
WHITE PLASTIC SHEET	Price	Purchase
WHITE PLASTIC SHEET A4 Size 0.25mm Thick SOLD IN PACKS OF 5	Ł2.75
WHITE PLASTIC SHEET A4 Size 0.38mm Thick SOLD IN PACKS OF 5	Ł3.35
WHITE PLASTIC SHEET A4 Size 0.5mm Thick SOLD IN PACKS OF 5	Ł3.55
WHITE PLASTIC SHEET A4 Size 0.75mm Thick SOLD IN PACKS OF 5	Ł4.55
WHITE PLASTIC SHEET A4 Size 1.0mm Thick SOLD IN PACKS OF 5	Ł5.55
WHITE PLASTIC SHEET A4 Size 1.5mm Thick SOLD IN PACKS OF 5	Ł7.55
WHITE PLASTIC SHEET A4 Size 2.0mm Thick SOLD IN PACKS OF 5	Ł9.55